Timber! Mountain Bike Bell - Bolt On
NEW v3.0 design.
TIMBER is the first bicycle bell designed exclusively for mountain biking (but is also compatible with drop bars!). Our goal was simple: awareness when you need it, and silence when you don’t.
New for 2019, it has a slimmer profile on your handlebars, and we've beefed up the strength of the internal clapper cable for longer life.
We've also upgraded the threaded insert to a made in the USA lifetime quality solid brass that won't ever strip or wear out.
The TIMBER Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8 mm diameter, the same as the wide part of your bars near the stem. It includes a flexible 22.2 mm shim, for mounting your bell securely near your grips, closer to your hands.
We've also improved the life of the index mechanism, and beefed up the strength of the internal clapper cable.
Thank you to our customers for all of your incredible feedback on how to improve on the original model. We couldn't have done it without you!
If you’re like us, you probably already use one of the following ways of alerting / warning others of your presence, all of them inadequate for their own reason.
- You can mount a cowbell or bear bell to your bike that produces a constant ringing sound. But you have to listen to the sound of the bell for your entire ride.
- You can ride without a bike bell, and pass by shouting the tiresome “passing on your left”. It doesn’t always get a positive reaction you were hoping for, because more often than not, you've startled them.
- You can ride with a traditional bike bell, and ring it just as you approach. Unfortunately, to most people this sounds and awful lot like “Beep beep, get out of my way”.
We based the design of our mountain bike bell on the iconic cowbell, only updated with a more modern look. A simple on/off lever controls the internal clapper. Slide it down for on, up for off. Or set it in between for a quieter sound.
The motion of the bike activates the sound. Because the sound is passive, you communicate to other trail users a friendly, "Hey, I'm just letting you know I'm here". The advance notice gives hikers or oncoming riders time to find a safe place to move off the trail.
The mountain bike bell mounts on your handlebars within easy reach of your hands. Our objectives were to keep it small, durable and inexpensive enough that every rider could afford one.
TIMBER is about more than just improving the social quality of your ride. It’s about advocacy, community, stewardship, and preserving trail access.
As mountain biking continues to explode in popularity, riders around the world face the constant threat of having their trails closed to biking. Part of the solution lies in improving the way riders are perceived by other trail users. A smile, a friendly wave, and an improved way of signalling your presence, can help to insure that we are able to continue to enjoying this amazing sport we all love so much.
If you find yourself using your bell on nearly every ride, this is the model for you.
The TIMBER Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8 mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2 mm shim, for mounting your bell securely near your grips, closer to your hands. (For oversize and DH bars, you will want to use the shim and mount near the grips.)
Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar.